Pearl Overseas
ISO 9001:2015
Translate this Page :
ArabicChinese (Simplified)EnglishGermanHindiPortugueseRussianSpanish

5 things You Need To Know About Stainless Steel Round Bars

A Quick Guide About The Advantageous Characteristics of Stainless Steel Round Bars

Introduction to Stainless Steel Round Bars

Stainless steel is a low-carbon steel comprising chromium at a weight of 10 percent or more and having more than 50 percent iron, also known as iron alloys. As ordinary steel does, stainless steel does not willingly corrode, rust or stain with water and the chromium makes it highly corrosion resistant for a given use or setting. One of the most significant players in the machining industry is the Stainless Steel round bar. Our SS round bars is used in manufacturing industries that are involved in the manufacture of fasteners and machinery with the delightful property of corrosion resistance. Below are 5 things you need to hear about Stainless Steel Round Bars:

Resistance to corrosion

One of the important benefits of using Stainless Steel Round Bars in your corresponding applications is that they have a high resistance to corrosion, allowing them to be used in all kinds of environments. It is also resistant to heat and fire at high temperatures and pressures. The low alloyed grades resist corrosion in the high atmospheric environments and strongly alloyed grades in most alkaline solutions, acids, and chloride bearing surroundings can resist corrosion.

Strength of Stainless Steel Round Bars

Its power is the major property of a Stainless Steel Round Bar. That is the ultimate explanation why steel is preferred over others, because the increasing bar load bearing power, the more you can use them for your engineering work. Based on your end-use the load required can vary. For starters, the round bars required for building must be stronger than those needed for the automotive industries.

Diameter of Stainless Steel Round Bars

It is possibly the most noticeable possible feature. This directly affects round bar load-bearing power. Yet the diameter needs to be measured according to the requirement of the case when you decide to use a round bar. Even though denser diameters may be chosen for buildings and heavy engineering operations, thinner ones are preferred for cars and other light industrial applications. In fact, it varies between 6 mm and 60 mm.

Elasticity of Stainless Steel Round Bars

The round bar must be elastic in nature, although within restrictions. Before, elasticity was not a major concern but its nonexistence created weak points along its length over time that used to give in when the load was extreme. Today, the need is strength, particularly in construction where the goal has been to make them earthquake proof. For such a requirement, the rods have to be elastic within restrictions. Not only that, they must also be able to come back to their original shape and measurement after the external force is removed. A person must thus know the range of extension necessary for a specific end use and choose the round bars accordingly.

Malleability and Ductility

In general, a steel component is vital to be flexible and ductile. This increases the convenience. The more desirable these properties are, the better the round bars can be cut and shaped as desired. Nonetheless, too much of these properties may again influence intensity reduction, which is frequently to be avoided. Therefore, a person who purchases a round steel bar must have a sensible understanding of the property specifications for end use.


If your industry needs the strength, longevity, and cost effectiveness of Round Bars, then it makes total business sense to connect with us at Pearl Overseas.

Leave a Comment

Your email address will not be published.

Get Best Quote

Fill out the form and we’ll be in touch as soon as possible.